Pc Card / Expresscard (Only For Model With Expresscard Slot); Smart Card (Only For Model With Smart Card Slot) - Panasonic CF-52 Series Reference Manual

Troubleshooting (Advanced)
Touch Pad
Cannot input using the touch pad.
Cannot use scroll function of touch
pad on Internet Explorer.

PC Card / ExpressCard (only for model with ExpressCard slot)

A card does not work.
SD Memory Card
Cannot use an SD Memory Card.

Smart Card (only for model with Smart Card slot)

Cannot use a Smart Card.
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility (
The touch pad may be disabled by some mouse drivers. Check your mouse's
operating instructions.
Move the mouse cursor to outside of Internet Explorer, and return to Internet
Explorer.
Insert the card correctly.
The card does not conform to the card standard.
Restart the computer after installing a driver (of card or other device).
Set [PC Card Slot] and [ExpressCard Slot] to [Enabled] in the [Advanced] menu
of the Setup Utility ( page
The port settings are not correct.
Read the instruction manual of the card or contact the manufacturer of the card.
Remove the card and insert it again (
The driver is not compatible with the operating system.
Set [SD Slot] to [Enabled] in the [Advanced] menu of the Setup Utility
( page 83).
This computer may not support the maximum speed some types of SD/SDHC
Memory Cards guarantee.
Insert the Smart Card correctly.
Set [Smart Card] to [Enabled] in the [Advanced] menu of the Setup Utility
( page 83).
To use a Smart Card, you need a specified software and driver.
83).
page 36).
109
page 81).