Panasonic CF-52 Series Reference Manual page 47

External Display
NOTE
It may not be possible to use the extended desktop with some software applications.
When you click the maximize button, the window is displayed on one of the displays. You cannot move the maximized
window to the other display.
To switch left (Primary Display) and right (Second Display), once return the display to "Built-in Display" only. Follow the
steps below.
Right-click the desktop and click [Graphics Options].
A
Click [Output To] - [Built-in Display].
B
Right-click the desktop and click [Graphics Options].
C
Click [Output To] - [Extended Desktop], and click [Monitor + Built-in Display] (the external display will be set to
D
primary device) or [Built-in Display + Monitor] (the internal LCD will be set to primary device).
To switch to the Extended Desktop, be sure to use the [Intel
other methods (e.g. display setting, etc.), the screen may not be displayed correctly.
The pop-up icon displayed by Fn key combination appears only on the primary device.
You cannot switch the display by pressing Fn + F3.
To change the display settings
<CF-52M/N series>
1
Right-click the desktop, and click [Graphics Properties].
2
Click [General Settings].
3
Select the display destination.
4
Set the display color and resolution etc.
5
Click [Apply].
6
Click [OK].
<CF-52P/Q/R series>
1
Click (Start) - [Control Panel] - [Adjust screen resolution].
2
Set the display color and resolution etc.
3
Click [OK].
®
Graphics and Media Control Panel] screen. If you use
47