Projectiondesign EVO2SX+ User Manual page 24

MENU SYSTEM
DYNAMIC SUB MENU
S-VIDEO / C-VIDEO / YPbPr (interlaced)
white boost
Increases the white level of the image for enhanced contrast
gamma
The source image is adapted to characteristics typical to certain applications. This
enables an optimized display of images, depending
on whether the source is video, computer etc.
DVI setup
Enables an expanded dynamic range when using DVI.
DIGITAL NOISE REDUCTION
digital noise reduction
Reduce noise in video images from unstable sources, cabling or material.
DNR mode
Switch DNR (digital noise reduction) off, manual or auto.
DNR level
VGA
Select filtering factor. Heavy filtering will reduce noise, but also smoothen out the image
and make it less sharp.
DNR split
You may run half screen with DNR and half screen without DNR to see the difference.
eco mode
Switch eco mode (low power and long life) on or off. When on, lamp power may not be
adjusted. When off, lamp power may be adjusted.
lamp power
DVI
Adjust lamp power when not in eco mode.
estimated remaining
The estimated remaining lamp life at the current lamp power.
horz border
adjustable black mask on top and bottom of image. Use arrow keys to adjust.
vert border
adjustable black mask on left and right side of image. Use arrow keys to adjust.
YPbPr (progressive)
2