Advertisement
Quick Links
Advertisement
Related Manuals for Projectiondesign Action three 1080
Summary of Contents for Projectiondesign Action three 1080
- Page 1 addendum...
- Page 3 Crystalio II. In addition, for projector control, a similar length RS232 cable should be connected. This will give full access to all functions of the projector, through the same menu interface as that of the Crystalio II.
- Page 4 Turns the projector OFF Color Management The color temperature can be calibrated as desired. The Not Corrected setting displays the native color temperature of the projector. The Temperature setting is adjustable in steps of 100 Kelvin from 3200 - 9200K Color Temperature...
- Page 5 MENU SYSTEM Projector control submenus Color Temperature use arrow keys on the remote or the crystalio to adjust the color temperature in steps of 100 Kelvin from 3200 - 9200K along the black body curve of the CIE color chart Lamp Power Use the arrow keys UP/Down to select lamp 1 or lamp 2.
- Page 6 Displays information about the projector network connection and the status. More Control For more detailed control, the projector has two protocols built in for control that can be used either through the RS232 connector or through the LAN connector. A simple instruction set (SIS) ASCII protocol gives access to the most frequently used commands.
- Page 8 601-0092-00...