Table of Contents
Advertisement
CLEANING
WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to fully cool.
CLEANING THE STAINLESS AND PAINTED METAL PARTS.
The trim fitted to this appliance is stainless steel, and must only be cleaned with a clean,
damp cloth. Black painted metal parts should be gently cleaned with a damp cloth.
Abrasive cleaners, chemical cleaning agents or any type of polish must never be
used as damage to the paint may result.
CLEANING THE GLASS PANEL
To clean the glass panel, first ensure that the fire is cool, please note that the glass panel will
remain hot for a considerable period when the fire has been switched off.
To remove the glass panel, follow the instructions overpage for removal and re-fitting.
The glass panel should be cleaned gently with a soft damp cloth and glass cleaner.
DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO CLEAN THE GLASS PANEL WHEN
THE APPLIANCE IS RUNNING.
FOLLOWING CLEANING OF THE GLASS PANEL, ALWAYS ENSURE THAT THE ALLEN KEY
IS REMOVED FROM THE ALLEN BOLTS AND REPLACED INTO ITS LOCATION AT THE
BOTTOM RIGHT HAND SIDE OF THE FIREBOX.
6
Advertisement
Table of Contents
