Advertisement
ATLANTA
Model No. FBFR**MN
** denotes fascia variant
RADIANT BALANCED FLUE GAS FIRE
User Instructions
These instructions should be read by the user before operating the appliance and retained
for future reference
This appliance is only for use on Natural Gas (G20) at a supply pressure of 20 mbar in G.B. /
I.E
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Flavel ATLANTA FBFR**MN
Summary of Contents for Flavel ATLANTA FBFR**MN
-
Page 1: User Instructions
ATLANTA Model No. FBFR**MN ** denotes fascia variant RADIANT BALANCED FLUE GAS FIRE User Instructions These instructions should be read by the user before operating the appliance and retained for future reference This appliance is only for use on Natural Gas (G20) at a supply pressure of 20 mbar in G.B. /... -
Page 2: Installation Information
INSTALLATION INFORMATION CONDITIONS OF INSTALLATION It is the law that all gas appliances are installed only by a competent (e.g. CORGI Registered) Installer, in accordance with the installation instructions and the Gas Safety (Installation and Use) Regulations 1998 as amended. Failure to install appliances correctly could lead to prosecution. It is in your own interest and that of safety to comply with the law. -
Page 3: Important Safety Information
Servicing should be carried out annually by a competent person such as a CORGI registered engineer. It is a condition of the Flavel guarantees that this is carried out by a competent person i.e. a CORGI registered Engineer in accordance with these servicing... -
Page 4: Operating The Fire
OPERATING THE FIRE The controls are located behind the ashpan cover. The controls, comprise a control valve to adjust the gas flow and a push button piezo igniter. To light the fire proceed as follows: - 1) Depress the control knob and turn anti-clockwise to the position marked pilot. Hold in the control knob for a few seconds to allow the gas to reach the pilot. - Page 5 CLEANING WARNING Before attempting any cleaning operation ensure that the fire has been allowed to fully cool. CLEANING THE STAINLESS AND PAINTED METAL PARTS. The trim fitted to this appliance is stainless steel, and must only be cleaned with a clean, damp cloth.
- Page 6 REMOVAL & REFITTING OF THE GLASS FRAME. Top infill panel. 4 Allen key fixing screws Remove the fascia & ashpan cover from the firebox. Remove the pilot heat shield which is held in place at each end by 1 screw. Remove the top infill panel by sliding it upwards out of the clips.
- Page 7 Due to our policy of continual improvement and development the exact accuracy of descriptions and illustrations cannot be guaranteed B-104490 Issue 2 BFM Europe Ltd. Trentham Lakes Stoke-on-Trent Staffordshire ST4 4TJ www.bfm-europe.com Telephone 01782 339000 Telephone (Service) 0844 7700169...
Need help?
Do you have a question about the ATLANTA FBFR**MN and is the answer not in the manual?
Questions and answers