Integra DTR-40.7 Basic Manual page 78

HDMI
Setting Item Default Value
HDMI CEC (RIHD) Off
En-46
Setting Details
Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device�
"On": Use this function
"Off": Do not use this function
When changing this setting, turn off and then on
again the power of all connected components�
● Depending on the TV set, a link may need to
be configured on the TV�
● This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal�
● When this setting is "On", the names of the
CEC-compatible components and "CEC On"
are displayed after this operation screen is
closed�
● Power consumption in standby mode may
increase if this setting is "On"� (Depending on
the TV status, the unit will enter the normal
standby mode�)
● If you operate the MASTER VOLUME
control on the unit when this setting is "On"
and audio is output from the TV speakers,
audio will be output also from the speakers
connected to the unit� If you want to output
from only either of them, change the unit or
TV settings, or reduce the volume of the unit�
● If abnormal operation occurs when you set
the setting to "On", set it to "Off"�
● When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off"�
Setting Item Default Value
HDMI Standby Off
Through
Advanced Settings (Setup Menu)
Setting Details
When this is set to anything other than "Off",
you can play the video and audio of an HDMI
connected player on the TV even if the unit is in
standby mode� Only "Auto" and "Auto(Eco)" can
be selected if "HDMI CEC (RIHD)" is set to "On"�
If you select anything else, set "HDMI CEC
(RIHD)" to "Off�"
● Power consumption in standby mode
increases if set to anything other than "Off"�
"BD/DVD", "CBL/SAT", "STRM BOX", "PC",
"GAME", "AUX", "CD", "PHONO", "TV": For
example, if you select "BD/DVD", you can play
the equipment connected to the "BD/DVD"
terminal on the TV even if the unit is in standby
mode� Select this setting if you have decided
which player to use with this function�
"Last": You can play the video and audio of the
input selected immediately prior to the unit being
switched to standby on the TV�
"Auto", "Auto (Eco)": Select one of these
settings when you have connected equipment
that conforms to the CEC standard� You can
play the video and audio of the input selected on
the TV, irrespective of what input was selected
immediately prior to the unit being switched to
standby, using the CEC link function�
● To play players on the TV that do not conform
to the CEC standard, you will need to turn the
unit on and switch to the relevant input�
● When using a TV that conforms to the
CEC standard, you can reduce the power
consumption in standby mode by selecting
"Auto (Eco)"�