Performing Multi-Zone Playback - Integra DTR-40.7 Basic Manual

Performing Multi-zone Playback

It is possible to perform playback in the main room and a
separate room at the same time, for example by playing
the Blu-ray Disc player in the main room where the unit is
placed while playing Internet radio in a separate room� It is
also possible to perform playback only in a separate room�
● With external players, it is possible to play the same
source or different sources in the main room and
separate room�
● You cannot select separate network services for the
main room and another room with the "NET" input�
● When listening to AM/FM broadcasting, you cannot
select different stations for the main room and separate
room� Therefore broadcasting of the same station will be
heard in the both rooms�
Playing Back
1� Press Zone2 on the remote controller, point the
remote controller at the main unit and press
zReceiver�
"Z2" lights on the main unit display and the multi-zone
function is enabled� (Zone 2 is now on�)
2� Press Zone2 again on the remote controller and
press Input Selector of the input to be played in a
separate room�
● If you turn the unit to standby during multi-zone
playback, the Z2 indicator is dimmed and the
playback mode is switched to playback in a separate
room only� Performing steps 1 and 2 while the unit
is in standby also switches the playback mode to
playback in a separate room only� To play the same
source in the main room and separate room, hold
down Zone2 for approximately 3 seconds�
To control on the main unit: press Zone2 and within 8
seconds, press the input selector button of the source to be
played in the other room� (To play the same source in the
main room and separate room, press Zone2 twice�)
To adjust the volume on the main unit
To adjust the volume, press Zone2 on the remote controller
and then adjust with VOLj/l� Alternatively press Zone2
Level  /  on the main unit� You can mute the sound by
pressing Muting on the remote controller�
To adjust the sound quality on the main unit
As for the operation, press Zone 2 on the main unit and
press Tone several times to display "Bass", "Treble" or
"Balance" on the main unit display� Display the desired
setting on the display and adjust it with + or −.
To turn off the function
After pressing Zone2 on the remote controller, press
zReceiver� Alternatively press Off on the main unit�
● If ZONE 2 is on, power consumption during standby
becomes larger than normal�
● While ZONE 2 is on, the RI linked system function
(interlink between Onkyo components) is disabled�
● Pressing Input Selector on the remote controller while
you are using the remote controller for Zone 2 will
switch the controlled target to the main room� To control
Zone 2 again, press the Zone2 button to enter the Zone
control mode�
6
Quick Setup Menu
You can perform common settings on the TV screen while
playing�
1� Press Q on the remote controller�
The Quick Setup menu is displayed on the connected
TV's screen�
Quick Setup
Listening Mode MOVIE/TV
Audio MUSIC
HDMI GAME
Information THX
2� Select the item with the cursors of the remote
controller and press Enter to confirm your selection�
● To return to the previous screen, press Return�
3� Select the setting with the cursors buttons of the
remote controller�
 Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC", "GAME" and "THX�
After selecting the Listening Mode, press Enter button to
confirm�
● It cannot be set when audio is played from the TV's
speakers�
 Audio: You can perform various audio settings including
audio quality and speaker level adjustment�
● You cannot select this item when audio is output from
the TV's speakers�
Bass, Treble: Adjust volume of the front speaker�
● It cannot be set if the listening mode is Direct or THX�
Phase Matching Bass: Suppress phase shift in the
midrange to enhance bass sound� Thus smooth and
powerful bass sound can be obtained�
● It cannot be set if the listening mode is Direct or THX�
Center Level, Subwoofer Level: Adjust the speaker
level while listening to the sound� The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode�
● Changes may not be possible depending on the
settings in speakers�
● This setting is not possible during Muting or when
using headphones�
A/V Sync: If the video is behind the audio, you can
delay the audio to offset the gap� Different settings can
be set for each input selector�
● It cannot be set if the listening mode is Direct�
AccuEQ Room Calibration: Enable or disable the
settings made by automatic speaker setting� To enable
them, you should normally select "On (All Ch)", and to
disable just the front speakers, you should select "On
(ex� L/R)"� The setting can be separately set to each
BD/DVD
input selector�
● This setting cannot be selected if the automatic
speaker setting has not been performed�
● It cannot be set if headphones are connected or the
listening mode is Direct�
Equalizer: Assign the equalizer settings adjusted in
"Setup"-"2� Speaker"-"Equalizer Settings" to "Preset1" to
"Preset3"� The same sound field setting is applied to all
ranges when set to "Off"�
● It cannot be set if the listening mode is Direct�
Step 3: Playing Back
En-19