Related Manuals for Integra DTR-40.6
Summary of Contents for Integra DTR-40.6
- Page 1 DTR-40.6 Basic Manual „ Advanced Manual found here http://integraworldwide.com/manual/dtr406upg/adv/en.html...
- Page 2 Before Start About the Basic Manual Features Supplied Accessories The Basic Manual leads you through the fundamental steps r Equipped with 7 channel amplifier to enjoy the AV Receiver from connections to TV, speaker r Supports playback in Dolby Atmos format which Indoor FM antenna --- (1) system and playback components, to necessary functions provides 360-degree placement and movement of...
- Page 3 Step 1: Connections Personal computer HDMI HDMI To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on HDMI cable the unit. See the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up".
- Page 4 Step 1: Connections „ Audio signal connection then Home on the remote controller, select "Setup" - Use a composite video cable to connect a TV with "1. Input/Output Assign" - "Monitor Out" and set the default composite video input jack or a player with composite Digital connection: Use a digital optical cable value of "MAIN"...
- Page 5 Step 1: Connections Connecting speakers " Surround back R/ Surround back L/ Height R Front R Front L Height L If there is only Speaker layout Center one surround back speaker, connect it to the BACK or HEIGHT L terminal. "...
- Page 6 Step 1: Connections Characteristics of speaker types r The speaker setting is 7.2 ch at the time of purchase. Height speakers arrangements You can change it manually or by using automatic "# output front stereo sound. $ outputs center sounds speaker setting.
- Page 7 Step 1: Connections Using Dolby Enabled Speakers Network connection Other connections You can enjoy Internet radio and DLNA by connecting the unit to LAN. Connect the Ethernet cable to the Ethernet AM/FM antenna connections port of the router. Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the Internet radio antenna position and orientation to get the best reception.
- Page 8 Step 2: Setting Up „ Important: When the unit is turned on for the first time, the 1st Step : AccuEQ Room Calibration Making the Initial Setup with the Setup setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, The test tone coming from each speaker will be measured to Wizard...
- Page 9 Set bi-amp only if you use 2 channel amp for each front speaker. The following CEC-compatible devices are found; Do you wish to turn on the CEC link? You can check whether or not each input source is Integra DHS-8.8 ENTER Next connected correctly.
- Page 10 Mode button and in the keyboard screen, enter the first three characters of the brand name of the device you are going to program (e.g., "INT" for Integra) and search for the remote control code. The guidance will also explain how to set the remote controller.
- Page 11 Step 3: Playing Back Remote controller parts name Playing the player and TV zReceiver button: Turns the unit on or into standby mode. Remote Mode/Input Selector button: Switches the input to be played. Cursor buttons and Enter button: Moves the cursor and confirms the selection.
- Page 12 Step 3: Playing Back Listening modes "Bass": Allows you to enhance or moderate the bass. Listening to AM/FM Radio "Treble": Allows you to enhance or moderate the treble. "Phase Matching Bass": Allows you to keep the clear You can select a listening mode from various options such midrange and effectively enhance the bass.
- Page 13 Step 3: Playing Back „ Network Service: Select to use Internet radio services Using the HOME menu Using Quick Setup menu and the DLNA function. When you connect the unit to the network and press Enter, the network service screen will be displayed on the TV.
- Page 14 Step 3: Playing Back „ Video: AccuEQ Room Calibration: Disables the sound field Using the multi-zone function set in the automatic speaker setting. The setting can be Monitor Out: The video input signals input to the unit separately set to each input. will be converted by the unit when they are output from r This setting cannot be selected if the automatic the HDMI OUT jack to the TV so that their resolution can...
- Page 15 Step 3: Playing Back z The sources from which you can enjoy the sound in Outputting Video/Audio to a Separate Room Listening to Music in a Separate Room a separate room: For Zone 2, any can be selected from among an external device connected to the HDMI input „...
- Page 16 Step 3: Playing Back „ c. Connecting Speakers in a Separate Room Performing Multi-zone Playback r While Zone 2 or Zone 3 is on, the RI linked system function (interlink between Onkyo components) is It is possible to directly connect the speakers in another disabled.
- Page 17 (Australian model) (Australian models) Front Panel zOn/Standby button: Turns the unit on or into standby Tuning Mode button: Switches the tuning mode. Phones jack: Stereo headphones with a standard plug mode. Display button: Switches the information on the display. are connected. Hybrid Standby indicator: Stays lit if the unit enters Home button: Displays the HOME menu.
- Page 18 Display Stays lit in the following conditions. "Z2" "Z3" (¼1): Zone 2 or Zone 3 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D.
- Page 19 Troubleshooting „ HDMI control does not function correctly. Resetting the unit Before starting the procedure r Set the CEC link function of the unit to on. It is also Problems may be solved by simply turning the power necessary to make the HDMI linked system setting on Resetting the unit to the status at the time of shipment may on/off or disconnecting/connecting the power cord, solve the problem.
- Page 20 Specifications z HDBaseT Amplifier Section Tuner Section OUT ETHERNET(CAT 5e/6)/IN(HDMI) Rated Output Power FM Tuning Frequency Range All channels: 110 watts minimum continuous power per channel, 87.5 MHz - 107.9 MHz (North American) z Video Inputs |QJO NQCFU EJCPPGNU FTKXGP HTQO *\ VQ M*\ YKVJ C 87.5 MHz - 108.0 MHz, RDS (Australian) maximum total harmonic distortion of 0.08% (FTC) AM Tuning Frequency Range...
- Page 21 Others License and Trademark Information DISCLAIMER Through this device you are able to link to other services or websites which “MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or are not under the control of any company which has designed, manufactured registered trademarks of MHL LLC in the United States and other counties.”...
- Page 24 Integra Division of Integra Division of Integra Division of 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. 1301, 555 Tower, No.555 West NanJin Road, Jin an, Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 Shanghai, OSAKA 541-0041, JAPAN http://www.integrahometheater.com...