Playing Music Files In A Shared Folder; About Shared Folder; Setting Pc; Playing From A Shared Folder - Integra DTR-40.7 Basic Manual

Playing Music Files in a Shared
Folder

About Shared Folder

A shared folder is configured in a network device such as a
PC or NAS (hard disk connected to your home network) for
access from other users�
You can play music files in a shared folder on your PC or
NAS connected to the same home network as that of the
unit� To play music files in a shared folder, you must first
configure Windows 8 or Windows 7, Make sure the unit
R R
and PC or NAS device are connected to the same router�
Internet radio
Router
PC
NAS
● The sharing options must be configured and a shared
folder created on the PC in advance�
● For information on how to configure the NAS device
and create a shared folder, refer to the NAS device's
instruction manual�

Setting PC

 Configuring the Sharing Options
¼
1� Select "Choose home group and sharing options" on the
"Control Panel"�
● If the menu is not displayed, check whether "View
by" is set to "Category"�
2� Select "Change advanced sharing settings"�
3� Check whether the following radio buttons are selected
in "Home or Work":
"Enable network discovery"
"Turn on file and printer sharing"
"Turn on sharing so anyone with network access can
read and write files in the Public folders�"
"Turn off password protected sharing"
4� Select "Save Changes" and click "OK" on the dialog box�
 Creating a Shared Folder
¼
1� Select and right-click the folder to share�
2� Select "Properties"�
3� Select "Advanced Sharing" on the "Sharing" tab�
4� Select the "Share this folder" check box and click "OK"�
5� Select "Share" for "Network File and Folder Sharing"�
6� Select "Everyone" from the pull-down menu� Click "Add",
and then "Share"�
● To set user name and password to a shared folder,
set "Permissions" in "Advanced Sharing" on the
"Sharing" tab�
● Check whether a workgroup is set�
Playing Music with DLNA

Playing from a Shared Folder

● Operation: You can set up by viewing the guidance
displayed on the TV screen (OSD)� Select the item with the
cursor buttons of the remote controller and press Enter to
confirm your selection� To return to the previous screen,
press Return�
● If the OSD language is set to Chinese, the operations
in this section are not displayed on the TV� Operate by
looking at the display on the main unit� Note that the
display on the main unit does not support the display
of Chinese characters� Characters that cannot be
displayed are replaced with asterisks ( )�
 Playing Back
¼
1� Press NET on the remote controller to display the NET
TOP screen�
● If the "NET" indicator on the display flashes, the unit
is not properly connected to the network� Check the
connection�
En-13