The Door Will Not Open; To Continue A Program After A Power Failure - Miele PW 6080 Vario Operating And Installation Instructions

Frequently asked questions

The door will not open

Possible cause
The door is locked after
a program has been
canceled.
The door will not open at
the end of a wash
program.
There is still water in the
drum and the machine is
unable to drain.
If you still cannot open
the door:

To continue a program after a power failure

Possible cause
Power failure.
Turn the machine off and
then back on again with
the "On/Off" button.
42
For safety reasons the drum door cannot be opened
if the suds temperature is higher than 50°C. Wait
until the machine has cooled down.
Press against the door handle, turn the machine off
and then back on again. Then pull on the door
handle again.
The drainage system may be blocked. Clean the
drainage system as described in the next section.
The door handle has a safety device to prevent
damage to the lock. Press firmly against the door
handle until you clearly hear the safety device
engage.
Confirm the message shown in the display by
pressing direct select button D and then press
the "Start" button. The program will then continue
with the next program stage.
Solution
Solution