A Fault Message Appears In The Display - Miele PW 6080 Vario Operating And Installation Instructions

A fault message appears in the display

Message
p
Water intake fault
Open the water
supply and
check the intake
hose.
,
Technical fault
,
Fault
Disinfection
temperature not
reached
q
Drain fault
Clean the drainage
system.
Fill the container
or
O
Fault
Container empty
* To switch off the fault message, press the jog shuttle.
Frequently asked questions
Possible cause
The water intake is
blocked or restricted.
The water pressure is
too low.
There is a fault.
During the disinfection
program the water
temperature was not
reached.
The water drainage is
blocked or restricted.
One of the external
detergent containers is
empty.
Solution *
Check whether
– the water supply is
opened enough.
– the intake hose is kinked.
– Select "Low water
pressure" in the
"Settings/Supervisor level"
menu.
Re-start the program.
If the fault message appears
again, contact Miele.
The machine has not carried
out the disinfection cycle
correctly. Restart the
program.
LP version: Clean the
drainage system.
AV version: Contact Miele.
See "Detergent - Empty
sensor".
39