Table of Contents
Related Manuals for Miele PW 6080 Vario XL
Summary of Contents for Miele PW 6080 Vario XL
- Page 1 Washer-extractor Commissioning, Programme chart, Settings PW 6080 Vario en - GB To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and commissioned. M.-Nr. 09 343 070...
-
Page 2: Table Of Contents
Contents Commissioning the machine ........4 Programme chart . - Page 3 Contents Logo............45 Language menu.
-
Page 4: Commissioning The Machine
Commissioning must be completed to determine the settings for daily operation. Certain settings can only be altered during the commissioning process. After that, these can only be changed by a Miele service technician. Setting the language J Settings #eština Language F... - Page 5 Commissioning the machine To set the time of day The time may already have been set at the factory. If it has, and is correct, you can skip this section. It is possible to alter the time at any stage via the Settings menu. Settings 24 h clock...
- Page 6 Commissioning the machine Determining target groups By selecting target groups, you are determining the programme range of the washer-extractor. You can see which programmes are assigned to each target group under "Programme chart" later in this booklet. Settings § Professional cleaners Target groups Equestrian Special programmes...
- Page 7 Commissioning the machine Each of these settings must now be See the paragraph "Water confirmed (and altered if required). connection" in the "Installation and More details about the settings are connection" section of the Operating given at the end of this booklet. and installation instructions.
- Page 8 ^ Select the option you want. Other settings can only be changed Immediately by a Miele Service Technician. The machine locks straight away. Code required In 3 minutes A code (000) must be entered in The machine will lock after a period order to change the settings.
- Page 9 Commissioning the machine Transport struts A message will appear in the display to remind you to remove the transport struts. ^ Remove them (if this has not already been done by your fitter). Then press the multi-function selector to confirm that this has been done.
- Page 10 Commissioning the machine Cottons Uni. 60°C Programme selection... 2 Minimum iron 40°C Settings F... 3 Delicates 40°C 15:00 4 Woollens H 30°C To finish the commissioning process completely, a first wash programme must be started. If the power to the machine is switched off before the first wash programme is started (e.g.
-
Page 11: Programme Chart
Programme chart Basic programmes Cottons Hygiene 70°C to 95°C Max. load .0 kg Use for Cotton, linen or cotton mix fabric, e.g. bed linen, baby clothing, underwear. Extra options Pre-wash, Starch stop, Rinse hold, Intensive*, Water plus* Detergent Universal detergent Cottons Uni. - Page 12 Programme chart Woollens / Cold to 40°C Max. load 3.0 kg Use for Machine-washable or hand-washable wool or wool blend fabric. Note Max. spin speed 1000 rpm Extra option Rinse hold Detergent Liquid detergent for machine-washable woollens Starch Cold to 40°C Max.
- Page 13 Programme chart Silks / Cold to 30°C Max. load 2.0 kg Use for Silks and other handwashable fabrics with no wool content Place socks, tights, bras etc. in a washing bag. Note Max. spin speed 600 rpm Extra options Rinse hold, Water plus* Detergent Liquid detergent for delicates Shirts...
- Page 14 Programme chart Outerwear Cold to 40°C Max. load 4.0 kg ® Use for Outerwear made from microfibre such as Gore-Tex ® ® SYMPATEX , WINDSTOPPER etc. Tips – Zip up jackets before washing. – Do not use fabric conditioner. Extra option Rinse hold Detergent Liquid detergent for delicates or fabric specific specialist...
-
Page 15: Household
Programme chart Household Dark garments Cold to 40°C Max. load 4.0 kg Use for Dark garments made from cotton or mixed fibre. Wash inside out. Note Max. spin speed 1000 rpm Extra option Rinse hold Detergent Liquid detergent for coloureds Denim Cold to 40°C Max. -
Page 16: Hotel
Programme chart Hotel Kitchen linen 60°C to 95°C Max. load 8.0 kg Use for Kitchen linen made from cotton and linen fabric, e.g. chef's whites, catering uniforms, serving cloths, cleaning cloths. Select Pre-wash for stubborn soiling. Use a detergent containing enzymes for the pre-wash. -
Page 17: Bedding
Programme chart Bedding Pillows 40°C to 95°C 1-2 pillows Use for Pillows with feather, down or synthetic fillings. Note A spin cycle is carried out after water is first added in order to deflate the pillows. Extra option Rinse hold Detergent Liquid detergent Down duvets... -
Page 18: Disinfection
Programme chart Disinfection Therm. DIS 15 min 85°C Max. load 8.0 kg Use for Cotton, linen and mixed fibre fabric. Notes – Thermal disinfection. – The wash cycle is followed by a disinfection phase at 85°C, with a holding time of 15 minutes. –... -
Page 19: Hygiene
Programme chart Hygiene Hygiene No laundry Hygiene will appear in the display if the last programme selected used a temperature below 55°C or if the Spin programme is selected. You should then run a programme that uses a temperature of at least 60°C or the Hygiene programme. -
Page 20: Bakers/Butchers
Programme chart Bakers/Butchers Flour 40°C to 95°C Max. load 8.0 kg Flour+ 40°C to 95°C Use for Overalls, jackets, hats and cloths made from cotton or mixed fibre. – Use a detergent containing enzymes. – Select the Flour + programme for heavy soiling. Note Includes a pre-rinse to remove coarse soiling. -
Page 21: Beauty Salons/Health Spas
Programme chart Beauty salons/Health spas Towels 40°C Max. load 6.0 kg Towels+ 40°C to 80°C Use for Lightly soiled cotton towels Tips – For dark coloured fabrics use a detergent for coloured fabric. – Select the Towels+ programme for heavy soiling. Extra option Rinse hold Detergent... -
Page 22: Buildings Maintenance (Av Machines Only)
Programme chart Buildings maintenance (AV machines only) Mops 50°C to 60°C Max. load 8.0 kg Use for Cotton, mixed fibre or microfibre mops Tips – For washing mops. – For washing mops for the first time. Note Mops are spun at the beginning of the programme to eliminate soiled water, and then pre-rinsed. - Page 23 Programme chart Pads 40°C Max. load 3.0 kg Use for Microfibre polishing pads and buffers Extra option Rinse hold Note Includes a pre-rinse to remove coarse soiling. Detergent Specially formulated detergent Wash cloths 30°C to 70°C Max. load 4.0 kg Use for Cotton, mixed fibre or microfibre cleaning cloths For cloths that are not going to be re-used immediately, but are...
- Page 24 Programme chart Greasy cloths 60°C to 95°C Max. load 4.0 kg Use for Cloths which are heavily soiled with e.g. cooking oil, made of cotton, mixed fibre or microfibre Note Includes a pre-rinse to remove coarse soiling. Extra option Rinse hold Detergent Specially formulated detergent Shake mops, cloths and pads out well to get rid of coarse soiling before...
-
Page 25: Fire Service
Programme chart Fire service Masks 10 min 70°C 4 Masks Masks 20 min 60°C Masks 30 min 40°C Use for Breathing masks with head straps Tips – Chemo-thermal disinfection programmes with different temperatures and holding times, for washing and disinfecting breathing masks. - Page 26 Programme chart Protective clothing 60°C Max. load 4.0 kg Use for Protective clothing (e.g. as used by the fire brigade), overalls, jackets, trousers Do not use to wash items lined in pure wool. Notes – Programme with pre-wash – Maximum spin speed: 1000 rpm Extra option Rinse hold Detergent...
-
Page 27: Professional Cleaners
Programme chart Professional cleaners WetCare sensitive 25°C 4.0-5.0 kg Clothing such as suits and jackets marked with the w or h Use for symbols Notes – After wet cleaning, items are treated in a finishing bath. – A liquid finishing agent should be used; this should be added to the fabric conditioner compartment. -
Page 28: Equestrian (Av Machines Only)
To protect blankets and the washer-extractor, remove metal buckles, eyelets and hooks or use special pouches* to cover the buckles. For best results, please do not exceed the maximum load. * These can be ordered from your Miele Dealer or the Miele Spare Parts department. -
Page 29: Special Programmes
Programme chart Special programmes You can create 5 special programmes and name these. Enter their details in the table below: – For example: – – EXTRA+ – – Pre-wash intensive – – Main wash intensive 95 °C – – Rinse 1 –... -
Page 30: Relay Control For External Dispensing System
Relay control for external dispensing system The washer-extractor is fitted with an adapter for an external dispensing system. The external pumps are controlled by relays in the washer-extractor. The dispensing containers must be filled with the correct detergent or additive in the order specified. - Page 31 Relay control for external dispensing system Pre- Main wash Main wash Finishing wash 1st Signal 2nd Signal Sport Indoor sportswear Outdoor sportswear Hotel Kitchen linen Table linen Curtains Bed linen Bedding Pillows Down duvets Synthetic duvets Natural fibre blankets Disinfection Therm.
- Page 32 Relay control for external dispensing system Pre- Main wash Main wash Finishing wash 1st Signal 2nd Signal Sluice (AV machines only) Sluice low/Sluice high MRSA plus Bakers/Butchers Flour (+) Grease and fat (+) Workwear (+) Beauty salons/Health spas Towels (+) Capes Buildings maintenance (AV machines only) Mops...
- Page 33 Relay control for external dispensing system Pre- Main wash Main wash Finishing wash 1st Signal 2nd Signal Fire service Masks 10 min R 5** Masks 20 min R 5** Masks 30 min R 5** Protective clothing Protective clothing + proof Proof protect.
- Page 34 Relay control for external dispensing system Pre-wash Main wash Block start "normal"/ "gentle" "normal"/ "gentle" "final "Finishing" "intensive" "intensive" rinse" Special programmes S.prog.1 R 2 + R 5 S.prog.2 R 2 + R 5 S.prog.3 R 2 + R 5 S.prog.4 S.prog.5 R 1 = Relay 1 = Pre-wash...
-
Page 35: Changing Default Settings
All settings may be changed upon entering a code (Settings /Supervisor level menu) Please contact the Miele Service Department for details. Note regarding the commissioning of the machine The machine must be commissioned as described at the beginning of this... -
Page 36: Settings Menu J
Settings menu J To open the Settings menu If the Settings menu is not locked (Code not required), some of the settings may be changed. Cottons Uni. 60°C Programme selection... 2 Minimum iron 40°C Settings F... 3 Delicates 40°C 15:00 4 Woollens H 30°C ^ Select Settings J from the entry menu and confirm your... -
Page 37: Settings/Supervisor Level Menu
Settings/Supervisor level menu To open the Settings/Supervisor level menu The Settings menu can be locked against unauthorised use (except for the Language option). It will then only be able to be accessed at Supervisor level by entering a code. To select a setting Settings Back A Language F... - Page 38 Settings/Supervisor level menu To confirm the code Confirm code Back A ^ Confirm the code you have entered. Code accepted Menu opened You are now in Supervisor level. You can alter the code if you want to prevent it being accessed by unauthorised personnel (see Settings Supervisor level).
-
Page 39: Language J
Settings/Supervisor level menu Language J Sort languages The display can be set to appear in You can select the order that you one of several different languages. want the languages available to appear in in the display if you have To select the language you want, go to first selected the International or the Languages J sub-menu. -
Page 40: Time Of Day
Settings/Supervisor level menu Time of day Supervisor level First select whether you want the You can alter the access code to the clock displayed as a 24 hour or 12 supervisor level. hour clock, or to not display it at all. ^ Enter the old code. -
Page 41: Standby
Settings/Supervisor level menu Standby Memory To save energy, the display goes out If an extra option has been selected after 10 minutes and the Start button for a programme, or the flashes slowly. recommended temperature or spin speed has been altered, the machine Operating the multi-function selector or will store the changes in memory at one of the short cut buttons switches... -
Page 42: Special Programmes
Settings/Supervisor level menu Special programmes You can create 5 special programmes and save these as favourite programmes with their own names. The special programmes are pre-programmed with basic settings. – Wash temperature: cold – Spin speed: without spin – Wash block: Main wash: short –... - Page 43 Settings/Supervisor level menu ^ Confirm Delete again until the symbols you wish to delete have been removed. Save programme name: EXTRA+ _ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 / Delete Continue...
- Page 44 Settings/Supervisor level menu 2. Programme creation menu You can choose the programme's features by changing the basic settings. Enter the names of your special programmes and their basic settings into the "Special programmes" table in the "Programme chart". EXTRA+ Back A Temperature Spin speed Wash block...
-
Page 45: Favourites
You can configure the 12 You can choose whether to have the programmes in the basic menu for "Miele Professional" logo or one of machine variant Shortcut keys + your own in the display. (The control Logo (only in conjunction with... -
Page 46: Intensive Water Plus
Settings/Supervisor level menu Intensive water plus Save You can choose whether you want You can choose whether you want the Intensive and Water plus extra the Save option to appear in the main options to be available for selection menu. The save function is required in the Extras menu. -
Page 47: Main Wash Water
Settings/Supervisor level menu Main wash water MOPS pre-spin (AV machines only) You can choose for the main wash to be carried out with either hot or cold Wet mops can be pre-spun at the water. Hot water can only be used if beginning of the Mops programme to the wash temperature is above 30°C. -
Page 48: Standard Finish (Av Machines Only)
Settings/Supervisor level menu Standard finish (AV machines Water level Cottons only) You can increase the water level for the main wash in the Cottons hygiene Mops can undergo a chemical and Cottons universal programmes. finishing process in the Mops programme (option only available The machine is delivered with the Block with an external dispensing system). -
Page 49: Pw Duration Cottons
Settings/Supervisor level menu PW duration Cottons Target groups The pre-wash duration can be You can extend your choice of changed in the Cottons hygiene and programmes by activating target Cottons universal programmes. group programmes. The machine is delivered with the Block The target group programmes selected parameters option selected (the wash will be added to the basic programmes. -
Page 50: Pre-Wash
Settings/Supervisor level menu Pre-wash Pre-rinse Cottons You can choose for pre-wash to be A pre-rinse can be carried out in the carried out with every Cottons Cottons hygiene and Cottons hygiene, Cottons universal and universal programmes. Minimum iron programme or to select The machine is delivered with this it each time via the Extras menu. -
Page 51: Coin Mechanism Lock
Settings/Supervisor level menu Coin mechanism lock Demo programme If your machine is fitted with a This can be used by dealers to payment system, you can activate demonstrate the machine in their the lock immediately after the start of showrooms. the programme, or three minutes When On is selected, the machine can after it has started. -
Page 52: Controls
Delay start You cannot then get back into Supervisor level. If you need to Using the timer you can set the time access it please contact the Miele you wish a programme to finish at Service Department. (see the Timer section). -
Page 53: Settings Which Can Only Be Changed During The Commissioning Process
If you wish to change any of these it being accessed by unauthorised personnel (the Language J setting settings at a later stage, please contact the Miele Service Department. can still be altered). – Code not required Payment system Only some of the settings can be A coin box needs to be fitted. - Page 56 Tel: (01) 461 07 10, Fax: (01) 461 07 97 800-MIELE (64353) E-Mail: info@miele.ie, Internet: www.miele.ie E-Mail: info@miele.ae, Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany Alteration rights reserved / Publication date: 07.22 M.-Nr. 09 343 070 / 03 ...