External Dispensing System; Empty Sensor - Miele PW 6080 Vario Operating And Installation Instructions

Detergent

External dispensing system

Empty sensor

32
The machine is fitted with an adapter for an external
dispensing system. Up to six dispensing hoses (not supplied)
can be connected to the machine. The external pumps are
controlled by relays in the machine. Each relay is turned on
for 2 minutes at a time.
A separate connection box for electrically controlling the
dispensing pumps is required, and must be fitted by a
Miele service technician.
The relay is controlled as described in the separate
booklet supplied with the machine "Commissioning the
machine / Program chart / Settings" to select additional
settings.. The containers must be filled with the correct
detergent or disinfectant in the order specified.
When the "Empty sensor" is activated, a message appears
in the display to show when an external liquid agent
container is empty (see "Settings - Supervisor level" in the
separate booklet supplied with the machine
"Commissioning the machine / Program chart / Settings").
If a container is empty, the following message will appear in
the display before the start of the program or while the
program is running:
Fill the container
i
OK
H
A program that has already been started continues to run
until it has finished.
^ Press direct select button D to delete the message in the
display, and refill the container.