Low Water Pressure; Empty Sensor; Cottons Level; Minimum Iron Level - Miele PW 5082 Operating And Installation Instructions

Low water pressure

This setting should be activated to
ensure the correct amount of water is
taken into the machine in areas where
the water pressure is constantly low
(below 100 kPa/14.5 psi).
The machine is delivered with the Low
water pressure option deactivated.

Empty sensor

You can activate the Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is No (no
empty sensor).

Cottons level

You can increase the water level for
the main wash in the Cottons
programme.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
programme data which has been
programmed on-site).
Settings/Supervisor level menu

Minimum iron level

You can increase the water level for
the main wash in the Minimum iron
programme.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
programme data which has been
programmed on-site).

Pre-wash temp. cottons

You can select the temperature for
the pre-wash in the Cottons
programme.
The machine is delivered with the Block
parameters option selected (the
temperature will be controlled
according to the programme data
which has been programmed on-site).

Pre-wash duration

You can lengthen the duration of the
pre-wash.
The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on-site).
65