Steam Milk (Optional) / Dual Milk (Optional) - WMF bistro! 8400 Series User Manual

Operation
2.7 Steam Milk (optional) /
Dual Milk (optional)
The milk is automatically heated or foamed.
The Steam Milk buttons can be assigned to up to four milk
foam quality levels, or to hot milk.
The Steam Milk buttons are assigned at the factory to three
foam quality levels (superfine, fine, standard) and hot milk.
Heat milk or foam milk
Fill a tall, narrow container with the desired milk
™
quantity
Do not fill the container above the halfway point, so that
the milk will not run over when it foams.
Insert the steam nozzle deep into the milk
™
Briefly press the desired Steam Milk button
™
Steam is discharged, depending on the Steam Milk button
assignment.
Steam dispensing ends after reaching the set temperature,
or when the Steam Milk button is pressed again.
Wipe steam outlet with a damp cloth
™
override function (optional)
Function is adjusted upon request by WMF Service.
Milk and foam can boil over if the temperature is set to
194 °F (90 °C), or when the override function is used.
Press and hold the desired Steam Milk button
™
Steam is dispensed for as long as the button is held
pressed.
Wipe steam outlet with a damp cloth
™
The maximum temperature setting is 194 °F (90 °C).
16
Steam Milk buttons
Button allocation
w Software w Settings
w Recipe and buttons
page 31
w Change recipes
page 32
caUtioN
Scald hazard.
Do not fill the milk
above the halfway
point, to avoid that
the hot milk will run
over.
Do not overheat milk when
foaming, otherwise foam volume
decreases.
User manual WMF bistro!