Cleaning the filter housing
The filter housing should be
checked from time to time, and
cleaned when there is a build-up of
lint there.
Quick cleaning
^ Use a vacuum cleaner to remove the
lint
– from the cover in the door opening
(above), and
– from the area in front of the fan
(below) if the lint filter has been
removed for cleaning.
Cleaning and care
Extra cleaning
– Fan
The fan behind the filter access panel
can become clogged with detergent
residues and lint.
Check the fan from time to time, and
clean it if it becomes clogged.
^ Using a damp cloth, carefully clean
residues from the impeller.
^ At the same time, clean the area in
front of the impeller.
^ Clean away lint using a vacuum
cleaner.
^ Remove any lint from the inside of the
open access panel and the rubber
seal, taking care not to damage the
seal.
27