Miele PT 5137 WP Installations Plan
Miele PT 5137 WP Installations Plan

Miele PT 5137 WP Installations Plan

Hide thumbs Also See for PT 5137 WP:

Advertisement

Installation plan

Tumble dryer

PT 5137 WP
PT 7137 WP
en - GB
To avoid the risk of accidents or damage to the machine, it is essential to read
operating and installation instructions before installation and commissioning
This prevents both personal injury and damage to the machine.
10 145 620 / 01

Advertisement

Table of Contents
loading

Summary of Contents for Miele PT 5137 WP

  • Page 1: Installation Plan

    Installation plan Tumble dryer PT 5137 WP PT 7137 WP en - GB To avoid the risk of accidents or damage to the machine, it is essential to read operating and installation instructions before installation and commissioning This prevents both personal injury and damage to the machine.
  • Page 2 Legend: Connection optional or required, Connection required depending on model Vented Cooling air Condensate drain hose Equipotential bonding Machine anchors Peak-load connection Electrical connection Box plinth Machine feet, adjustable Open plinth Payment system WTV Washer-dryer stacking kit Payment system connection Communication module Cooling air vent Air intake...
  • Page 3: Machine Dimensions

    PT 5137/7137 en - GB Machine dimensions 10 145 620 / 01...
  • Page 4 en - GB PT 5137/7137 Installation 10 145 620 / 01...
  • Page 5 PT 5137/7137 en - GB Installation 10 145 620 / 01...
  • Page 6 en - GB PT 5137/7137 Installation 10 145 620 / 01...
  • Page 7 PT 5137/7137 en - GB Installation 10 145 620 / 01...
  • Page 8: Technical Data

    Rawl plugs (diameter x length) 8 x 40 8 x 40 Anchoring of Miele plinths   Miele plinth installation (fasteners included) Required anchor points Wood screws according to DIN 571 8 x 65 8 x 65 Rawl plugs (diameter x length)
  • Page 9: Options & Accessories

    PT 5137/7137 en - GB Technical data PT 5137 WP PT 7137 WP M a c h i n e d a t a Overall machine dimensions (H/W/D) 850/600/728 850/600/728 Casing dimensions (H/W/D) 850/595/697 850/595/697 Site-access dimensions (H/W) Min. site-access (excl. packaging)
  • Page 10 This machine is fitted with a supply lead and a plug for plug-and-play The serial interface is provided by an additional plug-in XKM RS323 operation. module. The module can only be used on Miele Professional machines with a communication slot. The washer may only be connected to an electrical system that conforms to the national and local codes and regulations.
  • Page 11 Washer-dryer stack The quality of the concrete and its strength must be assessed A Miele tumble dryer can be stacked on top of the washer-extractor. A WTV stacking kit (optional accessory) is required for this. according to the machine load. Ensure that any raised concrete plinth...

This manual is also suitable for:

Pt 7137 wp

Table of Contents