Changing The Lamp - Miele PT 7186 Vario Operating And Installation Instructions

Frequently asked questions

Changing the lamp

Disconnect the dryer from the mains
electricity supply.
a Open the door.
The lighting is at the top of the door
opening on the right-hand side.
b Remove the screw.
c Lower the cover.
d Replace the lamp.
The temperature resistant lamp should
only be ordered from Miele.
,
The lamp specification and
maximum wattage is stated on the
data plate and on the lamp cover.
e Raise the cover again.
f Replace the screw.
36
,
Ensure that it is fitted into
position securely, as any moisture
could cause a short circuit.