Mounting The Cutting Attachment - Stihl FR 460 TC-M Instruction Manual

Mounting the Blade
Slide the line limiting blade into the
N
guide on the skirt.
Insert the screw and tighten it down
N
firmly.
FR 460 TC-M
Mounting the Cutting
Attachment
Placing Power Tool on the Ground
Shut off the engine.
N
Position your power tool so that the
N
cutting attachment mounting face is
pointing up.
Fitting the Thrust Plate
The machine comes standard with the
thrust plate.
1
Slip the thrust plate (1) over the
N
shaft (2).
NOTICE
The thrust plate on the gearbox is
necessary for mounting cutting tools.
Mounting Hardware for Cutting
Attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
Machine supplied without mounting
hardware
2
Only mowing heads may be used which
mount directly to the shaft (2).
Machine supplied with mounting
hardware
Mowing heads and metal cutting
attachments may be mounted.
English
17