Samsung WF50K7500A SERIES User Manual page 38

Operations
Delay End
You can set the washer to finish your wash automatically at a later time, choosing a delay
of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the
wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press START/PAUSE. The
4. To cancel the Delay End, restart the washer by pressing POWER.
Real-life case
You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay
End option to the current cycle with the 3-hour setting, and press START/PAUSE at 2:00
p.m. Then, what happens? The washer starts operating at 3:00 p.m., and ends at 5:00 p.m.
Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
Steam
With the Steam cycle, the washer senses the weight of the load and controls the steam
effect according to the load. This improves washing performance.
Available Steam cycles are: NORMAL, HEAVY DUTY, BEDDING, WHITES, SANITIZE,
ALLERGEN, and DEEP STEAM.
1. Turn the Cycle Selector to select a Steam cycle.
2. Press Steam.
3. Add detergent and fabric softener as instructed.
4. Press START/PAUSE to start the cycle.
NOTE
• Steam may not be visible or present during the cycle. This is normal.
• Unlike other Steam cycles, you don't need to press Steam for DEEP STEAM as the
Steam button turns on automatically.
38 English
WF7500K-000000-00_EN.indd 38
indicator turns on with the clock running.
3:00 pm
Start
5:00 pm
End
2016-01-14 4:33:41