Samsung WF50K7500A SERIES User Manual page 23

A
WF7500K-000000-00_EN.indd 23
To connect the water hose to the faucet:
B
1. Connect one end of each water hose to
2. Turn the fittings manually to the end,
3. When done, pull up or down the water
4. Put the other ends of the hoses into
the Hot (B) or Cold (A) tap.
and then tighten them just by an
additional two-thirds of a turn with a
wrench. Do not overtighten them to
prevent damage to the fittings.
hoses to check if they are properly
connected.
a bucket and open the taps for 10-15
seconds to remove impurities. When
done, close the taps.
English 23
2016-01-14 4:33:38