Hyundai HYM46SPE User Manual page 25

6.4. Fuel & Carburetor.
The use of old or stale fuel will impair starting
and running of machine.
To drain the carburetor float bowl undo the drain bolt making sure that the washer is not lost.
Use a suitable container to catch fuel. Take care not to spill fuel and make sure that all spilt fuel
is cleared away safely. Open fuel valve to make sure all fuel is drained.
Once drained you can release bowl by undoing bowl release bolt on bottom of float bowl,
make sure that you do not lose the bowl sealing washer. Remove any remaining fuel from
6.4.1. Cleaning.
• DO NOT hose engine.
•
Water can damage engine or contaminate the
fuel system.
6.4.1.1. Wipe deck with dry cloth.
6.4.1.2. You can hose under deck by tilting the
mower. Make sure you tilt the machine so that
the air filter is facing up. The HYM51SPE has a
hose connection on the top of the deck for
cleaning. To clean connect the hose turn on
the water supply. Keeping the machine with
all wheels on the floor, start the engine and
run for several minutes to clean underside of
machine. Once cleaned turn off the machine
and water supply.
Make sure that the machine has fresh
unleaded fuel and always remove fuel before
storing for long periods. Never mix fuel with
oil.
bowl.
6.4.1.3. Dry the machine completely to prevent any rust
forming. You can use a light oil or silicone spray to prevent
rust between.
6.4.2. Storage.
• When storing the machine make sure it has
been cleaned as in cleaning section 6.4.1.
• You can use a light oil or silicone spray to coat
the equipment.
6.4.2.1. The following steps should be taken to
prepare your lawnmower for storage.
6.4.2.2.1. After the final cut of the season – you
must drain the fuel from the fuel tank. Then run
Page 25 Revision 5 - August 2016