Changing The Lamp - Miele PT 7137 WP Vario Operating And Installation Instructions

Changing the lamp


Disconnect the tumble dryer
from the mains electricity supply.
 Open the door.
You will find the interior lamp cover at
the top of the drum aperture.
 Insert a suitable tool, such as a wide
bladed screwdriver, under the side
edge of the lamp cover as illustrated.
 Apply a little pressure and whilst do-
ing so turn your wrist in the direction
of the arrow to open the cover.
The cover will open downwards.
The temperature resistant lamp should
only be ordered from your Miele dealer
or the Miele Spare Parts Department.

The lamp must be replaced with
one of the same type and specifica-
tion. The light specification and max-
imum wattage is stated on the data
plate and on the light cover.
 Turn the lamp anti-clockwise to re-
move.
Problem solving guide
 Replace the lamp.
 To close the cover push it upwards
and press it on the left and right until
you hear it click into position.

Ensure that it is fitted into posi-
tion securely, as any moisture could
cause a short circuit.
45