Caring For The Environment - Miele PT 7137 WP Vario Operating And Installation Instructions

Heat-pump dryer
Hide thumbs Also See for PT 7137 WP Vario:
Table of Contents

Advertisement

Caring for the environment

Disposal of the packing mater-
ial
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufactur-
ing process and also reduces the
amount of waste in landfill sites.
Disposal of your old appliance
Electrical and electronic appliances of-
ten contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be po-
tentially hazardous to human health and
to the environment. They are, however,
essential for the correct functioning of
your appliance. Please do not therefore
dispose of it with your household
waste.
Please dispose of it at your local com-
munity waste collection / recycling
centre.
Ensure that it presents no danger to
children while being stored for disposal.
2
Energy saving tips
To avoid unnecessarily long drying
times and high consumption of energy:
– Make sure that your laundry is thor-
oughly spun before drying.
The higher the spin, the greater the
savings that can be made in energy
and time during drying.
– Load according to the optimum
amount of laundry recommended for
the programme being used. Under-
loading is uneconomical. Overloading
gives a poorer quality of drying and
may cause unnecessary creasing.
– Make sure the room temperature is
not too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
– After every cycle remove the fluff
from the fluff filters in the door and in
the door opening.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents