Start The Programme - Miele PT 7137 WP Vario Operating And Installation Instructions

 Select a programme
 Switch the dryer on by pressing the
On/Off  button in.
Please note:
– If no further selection is made within
15 minutes, the dryer will switch off
automatically.
– This does not apply to machines with
a payment system.
Programme chart
– See separate booklet "Commission-
ing the machine, Programme chart,
Settings".
You can select a programme either by:
1 Using the appropriate short cut but-
ton to select one of the four pro-
grammes listed in the display ("fa-
vourites"), or
2 Selecting a programme from the Pro-
gramme selection menu (Turn A and
press B).
Select Gentle tumble or Timer
Short instructions
 Select Gentle tumble and/or the
Timer (delay start time) from the rl-
evant sub-menu.
Coin operation/payment sys-
tem
 If your machine is connected to a
payment system, the amount of pay-
ment required will appear in the dis-
play.
Opening the door or cancelling the
programme after it has been started
may cause a loss of credit (depend-
ing on how the tumble dryer was set
up).
 Start the programme.
The Start button will flash as soon as a
programme can be started.
 Press the Start button.
The Start button will now light up con-
stantly.
– Programme running will appear in the
display, followed by Drying and the
programme duration.
– With programmes with drying levels,
e.g. Machine iron, Hand iron etc. the
drying level reached will be shown in
the display later on.
23