Safety Symbols - Keysight n1921a Operating And Service Manual

Safety Symbols

The following symbols on the instrument and in the documentation indicate
precautions which must be taken to maintain safe operation of the instrument.
The Instruction Documentation
Symbol. The product is marked with
this symbol when it is necessary for the
user to refer to the instructions in the
supplied documentation.
This symbol indicates that a device, or
part of a device, may be susceptible to
electrostatic discharges (ESD) which
can result in damage to the product.
Observe ESD precautions given on the
product, or its user documentation,
ESD
when handling equipment bearing this
mark.
This is the symbol of an Industrial
ISM GRP.1
Scientific and Medical Group 1 Class A
CLASS A
product.
4 Keysight N1921A and N1922A Operating and Service Guide
The CE mark is a registered trademark
of the European Community. This CE
mark shows that the product complies
with all the relevant European Legal
Directives.
ICES/NMB-001 indicates that this ISM
device complies with the Canadian
ICES-001.
Cet appareil ISM est conforme a la
norme NMB-001 du Canada.
The RCM mark is a registered
trademark of the Spectrum
Management Agency of Australia.
This signifies compliance with the
Australia EMC Framework regulations
under the terms of the Radio
Communication Act of 1992.