Calibration - Keysight n1921a Operating And Service Manual

Calibration

When calibrating a P-Series Wideband Power Sensor, there is no need to
disconnect it from the power source.
The power meter performs Internal Zero and Calibration routines. The process
used for this Internal Zero and Calibration is explained in
P-Series Wideband Power Sensors"
The chapter "Using P-Series Power Sensors" in the P-Series Power Meter User's
Guide explains in more detail the methods used the perform the zero and
calibration of the power sensor.
Keysight N1921A and N1922A Operating and Service Guide
on page 20.
Introduction
"Overview of the
1
19