Required Tools; Technical Specifications - Dell EqualLogic FS7610 Series Hardware Owner's Manual

Dell EqualLogic FS7610 Hardware Owner's Manual
Turning Controller Power Off
If you need to replace a controller, turn off the power to start a shutdown. Use a small, thin tool such as a #1
Phillips screwdriver to press and release the power LED button on the back of the controller you plan to remove.
See Figure 5.
Turning Controller Power On
If you shut down power to a controller, or replace a failed controller, you might need to turn it back on manually.
Use a small, thin tool such as a #1 Phillips screwdriver to press and release the power LED button on the
controller.
The power LED first appears solid amber, then slowly blinks to indicate that the controller is powering up. The
LED blinks green when the controller loads the operating system, and changes to solid green when the controller
is clustered and fully functional. See

Required Tools

If you are installing the appliance in a rack, you will need a #2 Phillips screwdriver (not supplied).

Technical Specifications

Table 6 lists the technical specifications for the NAS appliance.
Table 6: FS7610 NAS Appliance Technical Specifications
Category
AC Power Supply (per power supply)
Wattage
Heat dissipation
6
Figure 5: Turning the Controller Power On or Off
Table 5 for a description of all the power supply LED states.
Rating
Output 717 W
2446 BTU/hr
The heat dissipation is calculated using the power supply wattage rating. The
heat dissipation values are for the entire system, which includes the chassis and two
controllers.
1 Basic Appliance Information