Kyocera ECOSYS M2030dn/PN Servlce Manual page 109

Item No.
U995 Mem Data Indi
Description
Displays the memory data.
Purpose
To check the memory data.
Method
1. Press the start key.
2. Select [Print Engine].
Print Engine
3. Press the start key.
Offset
Data
4. Press the start key. The setting is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
A display and setup of the Engine section memory
Display
Reference offset
Reference data
Description
Description
Description
1-3-79
2PK/2PL/2PM/2PN-5