Register To A Topcom Butler M1200 Base; Selecting A Base Unit; Removing A Handset - Topcom BUTLER M1200 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
Topcom Butler M1200/Twin/Triple/Quattro
8

Register to a Topcom Butler M1200 base

You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as
handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
The handset subscription has been removed from the base unit (e.g. for reinitialisation)
If you want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Butler M1200 handset and base unit!!
Keep the Paging key on the base unit pressed for 4 seconds. During one minute the base
unit is in register mode and you must do the following to subscribe the handset:
Press Menu button
Select 'Register'
the base unit you would like to subscribe the handset to (1-4)
for the base and when found it will register
searching for the base
at the right the handset number.
8.1

Selecting a base unit

You can switch your handset between different registered base units if you have registered
a handset to more then one base. You can manually select the base unit or automatically let
the handset choose the nearest base.
Press Menu button
Select 'Select base.
keys and press
8.2

Removing a handset

You can remove a handset from a base to allow another handset to be registered:
Press Menu button
Select 'Delete HS'. Press OK and select the handset you which to remove (1-4)
OK to confirm
Enter the pin code (0000) and press
You can only remove existing handsets and others then the one you are
using.
11
Use the
Enter the base pin code (0000) and press
When the handset is registered, it will show the handset name and
Use the
Select 'Auto' or the base number (1-4) by the Up/Down
.
Use the
button to scroll to 'System' and press
If the pin is wrong, the handset will restart the
button to scroll to 'System' and press
button to scroll to 'System' and press
. Enter the number of
The unit will start searching
.
Topcom Butler M1200/Twin/Triple/Quattro
/
Press

Advertisement

Table of Contents
loading

Table of Contents