Table of Contents
Advertisement
Section 4: Measurement Options
Enabling math
The selected math calculation is enabled by simply pressing the MATH key. When enabled, the
MATH annunciator turns on and the calculation type (NONE, POLY, %, or % DEV) is displayed.
Also, one of the following messages is briefly displayed:
Math Enabled
Display = NONE (reading)
Math Enabled
Display = POLY (reading)
Math Enabled
Display = % (reading)
Math Enabled
Display = % DEV (reading)
Math Enabled
Display = DEV (reading)
Math Enabled
Display = RATIO (reading)
Math Enabled
Display = LOG10 (reading)
Math is disabled by pressing MATH a second time.
Additional math operations
In addition to the math performed on single readings described above, the Model 6517B has these
math operations:
•
Math performed on buffered readings (maximum and minimum values, average, and
standard deviation).
•
Math performed on single readings as part of a pass/fail limits test.
Complete information on MATH is provided in Section 9 of the Reference Manual.
Figure 4-7
Combining math calculations
4-18
Return to
Section Topics
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Model 6517B Electrometer User's Manual
6517B-900-01 Rev. A / Jun 2008
- Quick Links:
- Resistance Measurements
- Labview Driver
Hide quick links:
Advertisement
Table of Contents
