Yanmar 4JH2E Service Manual page 265

Chapter 7 Reduction and Reversing Geor
5. Disassembly_
(2)Withdraw the large gear (B). thrust collar (A), cup·
spring, spring retainer, drive gear and inner bearing
race.
Use a pulley extracter, with the clutch shaft fixed
in a vice.
(3) Remove the key
(4)Withdraw the thrust collar (8) and inner needle bearing
race with the pulley extractor.
Drive cane
,....Inner needle bearing
Thrust collar (B)
7-50
(5)Remove the snap rings
(6)Draw out the drive cone.
Drive cone
4JH Series.
Snap ring plier
Snap ring
Printed in Japan
AOAJ029-9002