Yanmar 4JH2E Service Manual page 258

Chapter
7
Reduction and Re1·ersing Gear
4. Special Tools
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 J H Series.
4.Special Tools
Name of tool
Inserting tool
Part No. 177075-09030
Inserting tool
Part No. 177088-09150
Spline socket
Pan No. 177073-09020
Ring nut wrench
Part No. 177073-09010
Printed in Japun
ADA1029·9002
Shape and size
\::-~".:-.
_ _ ¢35.2 (1.386)
2 {0.079J
--"""'-
¢40 (1.575)
¢42.7 (1.681)
.......
~30 (1.181)
5 {0.197)
mm{in.)
¢12
(0.472J
Application
For installing input and
output shaft bearings.
For installing intermediate shaft
and clutch shaft bearings.
For checking limiter torque of the
torque limiter
For removing and tightening the
torque limiter