Control Panel Features - Gamma 8800 Els Owner's Manual

CONTROL PANEL FEATURES

ESC Button - Press to return to the
Stringing Screen from the Settings
Screen, String Length Meter Screen or
to cancel a change being made to one
of the functional settings.
KNOT Button - Press once to enable
and display the Knot Icon - Press
again and hold while the Knot icon is
displayed to highlight the setting and
make changes.
SOUND Button - Press to turn on or
turn off beeper. When in the Settings
Screen, the Sound Icon will include an
"X" when Beeper is disabled and ")))"
when the beeper is enabled.
PULLING SPEED Button - Press once
to display the Pulling Speed Icon - Press
again and hold while the Pulling Speed
Icon is displayed to highlight the setting
and make changes.
MAIN/CROSS String Button - Press
to select and display the Main String
Tension Setting or the Cross String
Tension Setting.
PRE-STRETCH Button - Press once
to enable and display the Pre-stretch
Icon - Press again and hold while the
Pre-stretch Icon is displayed to highlight
the setting and make changes.
STRING LENGTH METER Button -
Press to enable and display the String
Length Meter - Pressing again will
toggle the measurement units between
feet (FT) and meters (M).
LBS/KG Button - Press to toggle the
Tension Setting between LBS and KG.
ENTER Button - Press to confi rm and
save changes to any machine settings
and to zero the String Length Meter.
RETURN Button -
the Stringing Screen from the Settings
Screen, String Length Meter Screen or
to cancel a change being made to one
of the functional settings.
MEMORY Button - Press to scroll
through 9 programmable Memory
Settings (M1-M9) - Press and hold for
5 seconds to enable Basic Stringing
Mode (M0).
F1 Button -
tings Screen to view and make changes
to any of the machine settings. Pressing
and holding the F1 button for 5 seconds
will display the Information Screen,
which includes the total number of
strings pulled on the machine. Pressing
the ESC or RETURN button will exit
from the Information Screen.
F5 Button - Press to reverse the order
in which the Memory Settings are
scrolled through - When the LED is illu-
minated the Memory Settings will scroll
in decreasing order.
F2-F3-F4 Buttons - Press to increase
String Tension values in the tens place
(F2), units place (F3) and tenths place
(F4) and press to increase setting val-
ues for Knot, Pre-stretch and Speed.
F6-F7-F8 Buttons - Press to decrease
String Tension values in the tens place
(F6), units place (F7) and tenths place
(F8) and press to decrease setting val-
ues for Knot, Pre-stretch and Speed.
10
Press to return to
Press to display the Set-