Dualstrusion - Flashforge Creator Quick Start Manual

to a sheet of paper) and export the gcode to your SD card as an s3g file. Now just put
the SD card into your Creator's SD slot and use the LCD interface to start your
print! There's a 26-character limit on filenames for use with The Creator, so if you're
having trouble, just make that filename a bit shorter.
And remember, if you change your mind and want to print something else, you can
always press the center button and use the arrows to navigate to a cancellation.

Dualstrusion

Dual Extrusion with ReplicatorG
First, you'll need to find a dual extrusion model to print. Go into ReplicatorG's
"Thingiverse" menu and select "Dual Extrusion models!" It will bring you to every
Thing tagged "Dualstrusion" on Thingiverse.
Any dual extrusion model you find is going to be composed of two .stl files, one for
each color or material. Make sure you download both. Then go to ReplicatorG's
"Gcode" menu and select "Merge .stl for DualExtrusion."