Steering Wheel; I.attachment - Eurotrac W10 Operation Manual

I.ATTACHMENT

Loader is equipped with a standard six-bar working device which can maintain the
balance of the bucket while in the rising process.
J.MULTI-FUNCTIONAL CONTROL HANDLE
The control handle is on the right of the driver's position.W10 adopt simple handle without
shift control(Shift control was achieve by foot brake), handle can only control multi-channel
valve, to make raise and tilt movements can be separated or join together. Before open the
boonet, please make sure the operating handle was press down and forward.
K.PARKING BRAKE LEVER
The accelerator pedal which on the operator right is connected with engine by cable,
it can control drive speed by controlling engine speed. The parking brake lever is
connected by a rod to the park brake drum mounted on the drive axle. The park brake is
used for parking or holding the loader on grades and should always be set for parking and
released before driving. The brakes are engaged as the lever is pulled toward the operator.
Push the lever away from the operator (down) to release the brake.
L.PEDALS
The foot brake pedal on the left of the driver is connected to the Pump, which can
control the oil supply, so as to control the speed of the loader, forward and reverse.
M. STEERING WHEEL
Steering wheel is just like normal that is when steering wheel rotate right, the loader will
turn right, when steering wheel rotate left, the loader will turn left.
N.INSTRUMENT PANEL
Monitoring the status of machine, feedback the operation information to operator in time..

IT IS ESSENTIAL THAT THE OPERATOR BECOMES ACCUSTOMED TO
BOTH THE LOCATION AND OPERATION OF THE CONTROLS, BEFORE
ATTEMPTING TO DRIVE THE LOADER FOR SAFE OPERATION.
The root are value of machine vibration acceleration to the arm is lower than

2.5m/s2
The root are value of machine vibration acceleration to the body is lower
than 0.5m/s2
Ignition Switch
Horn control switch
Headlamp Switch
Direction-indicator switch
Page 15/47
W10 series loader operation manual
Switches
Waterproof loader ignition switch, including the anti-
●
re-start function.
●
Installed in the steering gear box
●
Installed in the steering gear box
●
Installed in the steering gear box
JST
Series
Updated 10/6/2016