S E C T I O N 1 M A I N C O M P O N E N T S; Engine And Pump; S E A T - Eurotrac W10 Operation Manual

SECTION 1: MAIN COMPONENTS
The W10 is a four-wheel drive mini-loader. It contains:
o 3-cylinder diesel engine,
o Hydrostatic travel drive system,
o Multi-function operating handle,
o 12 Volt electrical system.
A. ENGINE AND PUMP
The loader is powered with industrial engines, with four stroke cycle and direct
injection. The engines are certified by the manufacturer to meet the more
advanced emissions standards.
W10 series loader has an automatically variable piston pump.
B.MOTOR
There is no drive axle in W10, the four wheel of front and rear axle are hydraulic gerotor
motors.
C.BRAKING SYSTEM
Hydrostatic drive can serve as a driving brake, and be installed on the drum brake of the two
rear wheel as a parking brake.
D.WHEELS AND TIRES
Four bolts are used to fix the tires on the drive wheel. The LOADER tires are pneumatic type
which gives a smooth ride combined with maximum drawbar pull. Remember to check the
pressure of your pneumatic tires regularly. Uneven tire pressure will not only increase tire
wear, but will also decrease tractive performance.
W10 Tire model：23 x8.5-12NHS
E.FUEL CELL
The fuel cell is integrated in the front frame, and it is equipped with a filler cap and a fuel
gauge.
F.ELECTRICAL SYSTEM
The W10 uses a 12 Volt, automotive type, negative ground, electrical system. The system
45 A.h battery, one combination instrument, three working lights, two turn lights, two
taillights, horn, various sensors and other circuits.
G. QUICK REMOVAL DEVICE
The demolition equipment of the tool is controlled by a Joint Multi-way valve, which can
realize a quick assembly and disassembly.
H.SEAT
Seats of the loader with seat belts can be adjusted forward and backward. The class of
seat is EM8.As an option the loader can be fitted with a comfortable suspended seat.
Page 14/47
W10 series loader operation manual
Tire pressure：4.5 bar
JST
Series
includes a
Updated 10/6/2016