Settings; Table 5-65. To Be Named - ABB TPU2000 Technical Manual

TPU2000/2000R Modbus/Modbus Plus/ Modbus TCP/IP Automation Guide
Address Item
60662 OUTPUT 6 Characters
60663 OUTPUT 6 Leftmost 2 Characters
60664 OUTPUT 7 Rightmost 2 Characters
60665 OUTPUT 7 Characters
60666 OUTPUT 7 Characters
60667 OUTPUT 7 Leftmost 2 Characters
60668 Reserved
60669 Reserved
60670 Reserved
60671 Reserved
Each of the Programmable Output's may be delayed to operate on a time setting. The timer configuration
settings are configured by the settings transferred to Registers 60768 through 60775.

Table 5-65. To Be Named

Address Item
60768 OUT 5 delay in 0.01 sec inc
60769 OUT 7 delay in 0.01 sec inc
60770 OUT 4 delay in 0.01 sec inc
60771 OUT 6 delay in 0.01 sec inc
60772 OUT 3 delay in 0.01 sec inc
60773 OUT 2 delay in 0.01 sec inc
60774 OUT 1 delay in 0.01 sec inc
Note 1: Range is as Such 0.00 <= Range <=60 * 100

Settings

There are three setting groups (PRIMARY, ALT 1 and ALT 2) possible in the TPU2000 and TPU2000R.
However, the number of defined registers to read or transmit for the configuration process may vary depending
upon the TPU model number one would purchase. If one has a 3 Winding TPU2000R, additional blocks of
registers must be read for the following 3 Winding Configuration Data:
•
Primary Settings
•
Alternate 1 Settings
•
Alternate 2 Settings
•
Configuration Settings
•
Counter Settings
•
Alarm Settings
The selections are determined by the control bits set for group selection (Reference Section 5). The relay
settings are configured via a selected CURVE SELECTION TYPE. These are based on different functions such
as:
CURVE SELECTIONS
MODE SELECTIONS
The curve selection types are based upon whether the relay is an ANSI or IEC type. The following is the
description of the codes to select the curve and recloser curves.
High byte consists of bits 15 through 8.
Low byte consists of bits 7 through 0.
(Note Bit 0 is the right most bit whereas bit 15 is the left most bit)
Description
2 Digit ASCII Characters
2 Digit ASCII Characters
2 Digit ASCII Characters
2 Digit ASCII Characters
2 Digit ASCII Characters
2 Digit ASCII Characters
Description
Unsigned Integer 16 Bits (See Note 1)
Unsigned Integer 16 Bits (See Note 1)
Unsigned Integer 16 Bits (See Note 1)
Unsigned Integer 16 Bits (See Note 1)
Unsigned Integer 16 Bits (See Note 1)
Unsigned Integer 16 Bits (See Note 1)
Unsigned Integer 16 Bits (See Note 1)
192