Mounting And Operation - Siemens SIMEAS P 7KG7750 Operating Instructions Manual

2.13

Mounting and Operation

During operation of electric devices, certain parts of the device
are subject to dangerous voltages. Ignoring the warning notes
can result in severe injury or damage to property. Strict com-
pliance with all safety information is imperative.
®
The SIMEAS
installed on a switchboard or in a control cabinet. After instal-
lation, it is important that all terminals are properly covered
to prevent accidental contact with energized parts.
The device location should be largely free from vibra-
•
tions. The device must be operated within allowable
ambient temperature limits (see technical specifica-
tions).
Operating the device outside of the operating tempera-
•
ture range can lead to measurement errors and device
failure.
Screw-type terminals for 2.5 mm
•
Steps must be taken to prevent condensation on or
•
within the device during operation.
Steps should be taken to minimize exposure of the
•
device to direct sun light and large temperature varia-
tions.
WARNING!
P is a build-in device and must therefore be
2
68