What To Do If - Electrolux EOB2200 User Manual

Installing the door and the glass panel

10. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
operate.
The appliance does not
operate.
The appliance does not
operate.
The oven lamp does not
operate.
2
1
Problem
7. Carefully lift (step 1) and remove (step
2) the glass panel.
8. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is completed, install
the glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly. Refer to
the illustration.
Possible cause
The appliance is not acti-
vated.
The Minute Minder + End
of Cooking programmer
is not set.
The fuse in the fuse box
is released.
The oven lamp is defec-
tive.
ENGLISH
Remedy
Activate the appliance.
Refer to the chapter "Dai-
ly Use".
Set the Minute Minder +
End of Cooking program-
mer. Refer to the chapter
"Clock functions".
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the oven lamp.
15