Setting The User Defaults - Panasonic AJ-HD1200A Operating Instructions Manual

Setup (initial settings)
3
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the LOAD
position, and press the SET button.
The unit is set to the LOAD mode, and the LOAD
screen appears on the video monitor.
SET–UP MENU
NO
2
FACTORY
USER (ALL)
USER (NOT SYSTEM)
4
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the FACTORY
position, and press the SET button.
O When the cursor is moved to FACTORY and
this operation is performed, all the settings
except the SYSTEM menu settings are
returned to the factory settings.
O When the cursor is moved to NO and this
operation is performed, the display returns to
the menu screen without restoring the factory
settings.
5
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu setting procedure.

Setting the user defaults

1
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is set to the menu setting mode, and the
menu screen appears on the video monitor.
2
Perform the operations in steps
"Setting method using the on-screen menus,"
and change to the desired settings.
3
Press the RESET button.
The unit is now set to the default setting mode,
and the default setting screen now appears on
the video monitor.
SELECT MODE
0 ESCAPE
2
1 LOAD
2 SAVE
3 PROTECT
<LOAD>
2 6
to for
4
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the SAVE
position, and press the SET button.
The unit is set to the SAVE mode, and the SAVE
screen appears on the video monitor.
SET–UP MENU
NO
2
USER (ALL)
USER (NOT SYSTEM)
5
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the USER (ALL)
position, and press the SET button.
O When the cursor is moved to USER (NOT
SYSTEM) and this operation is performed, all
the settings except the SYSTEM menu
settings are updated.
O When the cursor is moved to NO and this
operation is performed, the display returns to
the menu screen without updating the settings.
6
The screen prompting the user to confirm
whether the settings are to be saved now
appears. To save the settings, press the
MENU-UP button or MENU-DOWN button to
move the cursor to the YES position, and
press the SET button.
The settings are now stored in the memory.
SAVE OK?
NO
2
YES
7
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu setting procedure.
<SAVE>
25