Panasonic AJ-HD1200A Operating Instructions Manual page 44

Setup menus
VIDEO
Item
Superimposed
No. No.
display
628 U/C ENH H
0000
0001
629 U/C ENH V
0000
0001
630
1080i>HD_OUT
0000
0001
632
720p>HD_OUT
0000
0001
634 480p>HD_OUT
0000
0001
636 480i>HD_OUT
0000
0001
676 BLK CLIP
0000
0001
680 CC (F1) BLANK
0000
2DW
0001
681 CC (F2) BLANK
0000
2DW
0001
682 VO SETUP (HD)
0000
2UP
0001
0002
0003
683 VO SETUP (SD)
0000
2DW
0001
0002
0003
<Notes>
: With HD output (HD tape playback or up-converted output)
2UP
: With SD output (SD tape playback or down-converted output)
2DW
44
Setting
Superimposed
display
For enhancing the horizontal outlines during up-conversion.
0dB 0: 0dB
+1dB 1: +1dB
For enhancing the vertical outlines during up-conversion.
0dB 0: 0dB
+1dB 1: +1dB
For selecting the HD output signal format during 1080i tape playback or in the
1080i EE mode.
1080i 0: 1080i
720p 1: 720p
<Notes>
O This item's setting cannot be changed while a tape is being recorded or while
the recording pause mode is established.
O When 720p is selected as this item's setting, no signals are output from the DV
connector. If "1394" is selected as the menu item No.600 [VIDEO IN SEL]
setting, "HDSDI" is established as the VIDEO IN SEL setting.
For selecting the HD output signal format during 720p tape playback or in the 720p
EE mode.
1080i 0: 1080i
720p 1: 720p
<Notes>
O This item's setting cannot be changed while a tape is being recorded or while
the recording pause mode is established.
O When 1080i is selected as this item's setting, no signals are output from the DV
connector. If "1394" is selected as the menu item No.600 [VIDEO IN SEL]
setting, "HDSDI" is established as the VIDEO IN SEL setting.
For selecting the HD output signal format during 480p tape (DVCPRO50P)
playback.
1080i 0: 1080i
720p 1: 720p
For selecting the HD output signal format during 480i tape (DVCPRO50, DVCPRO,
DV or DVCAM) playback.
1080i 0: 1080i
720p 1: 720p
For setting whether to clip what is below the pedestal level for the Y (luminance)
signal of VIDEO OUT and SD OUT.
OFF 0: What is below the pedestal level is not clipped.
ON 1: What is below the pedestal level is clipped.
For selecting ON or OFF for the closed caption signal in the first field.
BLANK 0: Forced blanking
THRU 1: No blanking
For selecting ON or OFF for the closed caption signal in the second field.
BLANK 0: Forced blanking
THRU 1: No blanking
This selects the composite output signal in HD mode.
THRU 0: The signal is output with no setup added.
ADD22L 1: The signal is output from line 22 with a 7.5% setup added.
ADD21L 2: The signal is output from line 21 with a 7.5% setup added.
ADD20L 3: The signal is output from line 20 with a 7.5% setup added.
This selects the composite output signal in SD mode.
THRU 0: The signal is output with no setup added.
ADD22L 1: The signal is output from line 22 with a 7.5% setup added.
ADD21L 2: The signal is output from line 21 with a 7.5% setup added.
ADD20L 3: The signal is output from line 20 with a 7.5% setup added.
Description of settings
" " indicates the factory setting.