Table of Contents
Advertisement
Setup (initial settings)
5
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
The unit is now set to the menu protection mode.
When the LOCAL/MENU/REMOTE switch is set
to the MENU position, the unit is not set to the
menu setting mode, and "MENU PROTECTED"
appears on the video monitor screen.
<Note>
If, during the setting of the menu protection
mode, the LOCAL/MENU/REMOTE switch is set
to the MENU position while the COUNTER button
on the front panel is held down, the unit is set to
the menu setting mode, and the regular menu
settings can be performed.
2
Perform steps
to
the on-screen menus."
Releasing the menu protection
mode
1
Set the LOCAL/MENU/REMOTE switch to the
MENU position while holding down the
COUNTER button on the front panel.
The unit is set to the menu setting mode, and the
menu screen appears on the video monitor.
2
2
Perform steps
and
procedure described above.
The screen prompting the user to confirm
whether to initiate menu protection appears on
the video monitor.
MENU PROTECT OK?
NO
2
YES
3
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the NO position,
and press the SET button.
The menu protection mode is now released.
7
of "Setting method using
3
of the menu protection
Displaying the DIAG menu
The unit comes with a function for displaying the "hour
meter," "software version" and "deck serial No." on the
video monitor.
1
Set the LOCAL/MENU/REMOTE switch to the
MENU position while holding down the EJECT
button.
The unit is set to the DIAG display mode, and the
hour meter and deck serial No. appear on the
video monitor.
DIAG–MENU
Ser
222222222
H00 OPERATION
H01 DRUM RUN
H02 TAPE RUN
H03 THREADING
H04 F LOADING
H11 DRUM RUN r
H12 TAPE RUN r
H13 THREADING r
H14 F LOADING r
Items with "r" can be reset when the unit is
serviced.
2
With the hour meter displayed, press the
SEARCH button.
The software version appears on the video
monitor.
DIAG–MENU
SOFT VERSION
SYSIF
1.
AVDV
1.
SERVO
1.
END
The hour meter display is restored when the
SEARCH button is pressed again.
3
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
The unit is restored to its regular mode.
HOURS METER
00000H
00000H
00000H
00000T
00000T
00000H
00000H
00000T
00000T
-
-
.
22
22
2
22
-
-
.
22
22
2
22
-
-
.
22
22
2
22
27
Hide quick links:
Advertisement
Table of Contents
