Basic - Panasonic AJ-HD1200A Operating Instructions Manual

Setup menus

BASIC

Item
Superimposed
No. No.
display
001 LOCAL ENA
0000
0001
0002
002 TAPE TIMER
0000
0001
003 REMAIN SEL
0000
0001
0002
0003
005 SUPER
0000
0001
0002
0003
2
0004
2
0005
2
0006
2
<Note>
Even when OFF is selected as the menu item No.005 [SUPER] setting, the superimposing will be displayed in
accordance with what is set using menu item No.006 [DISPLAY SEL] during the menu settings. Once the menu
settings are exited, the display follows the setting selected for menu item No.005 [SUPER].
2 This appears when the AJ-YA120AG (optional accessory) has been installed.
" " indicates the factory setting.
Setting
Superimposed
display
For setting the buttons on the front panel which can be operated when the
LOCAL/MENU/REMOTE switch is at the REMOTE position.
DIS 0: None of the buttons can be operated.
ST&EJ 1: Only the STOP and EJECT buttons can be operated.
ENA 2: All of the buttons with the exception of COUNTER and RESET can be operated.
For setting how the time is to be displayed on the CTL counter display.
±12h 0: 12-hour display
24h 1: 24-hour display
For setting the superimposing of the remaining tape time and/or total tape duration
displays onto the VIDEO OUT2 connector.
OFF 0: No displays are superimposed.
2L 1: The remaining tape time is displayed on the second line.
1L 2: The remaining tape time is displayed on the first line.
R/TTL 3: The remaining tape time is displayed on the first line and the total tape duration
on the second line.
<Notes>
O The information will not be displayed when 2L is set and TIME is selected as the
menu item No.006 [DISPLAY SEL] setting.
O The remaining tape time will not be displayed when R/TTL is set and TIME is
selected as the menu item No.006 [DISPLAY SEL] setting.
For setting the superimposing of the displays onto various connectors.
OFF 0: The displays are superimposed onto none of the output connectors.
CMPST 1: The displays are superimposed onto VIDEO OUT2.
CMPNT 2: The displays are superimposed onto the HD component output (Y).
SDSDI 3: The displays are superimposed onto SD SDI OUT.
2
HDSDI 4: The displays are superimposed onto HD SDI OUT.
2
CPS&SD 5: The displays are superimposed onto VIDEO OUT2 and SD SDI OUT.
2
CPN&HD 6: The displays are superimposed onto the HD component output (Y) and HD SDI
2
OUT.
Description of settings
33