You can customize your VC110 video conferencing endpoint by personally configuring
certain settings, for example, site name, time & date and language. You can add
contacts to the local directory manually or from the call history.
This chapter provides basic operating instructions for customizing your endpoint. Topics
include:
General Settings
Local Directory
Call History Management
Call Type
Bandwidth Settings
Video Size Mode
Volume
Far-end Camera Control
If you require additional information or assistance with your new endpoint, contact your
system administrator.
The endpoint will enter the sleep mode automatically when it has been inactive for a
period of time (the default period is 10 minutes).
When the endpoint is in sleep mode, it will still accept incoming calls. The display device
will prompt "No Signal", and the VCP40 phone LCD screen prompts "Sleeping Press any
key to resume". You can press any key on the remote control or VCP40 phone to wake
the endpoint up. When receiving a call, the endpoint will be woken up automatically.
You can change the automatic sleep time via the remote control or web user interface.
You can also press the sleep key on the remote control to make the endpoint sleep
immediately.
Customizing the VC110 Video Conferencing Endpoint
41