Getting Started; Inserting The Memory Card; Installing Car Dvr; Adjust The Angle Of The Dvr - NanoCam Plus NCP-DVRHD2 User Manual

2. Getting Started

2.1 Inserting Memory Card
With the Car DVR turned off and the screen facing towards you insert the memory card with the text on the Micro SD card facing toward
you. Push the memory card in until a click is heard.
To remove the memory card
Ensure that the Car DVR is powered off, push the memory card until a click is heard and release the card to eject.
2.2 Installing the Car DVR
1. Remove the protective stickers from the Car DVR and the Suction Mount.
2. Slot the mount bracket into the socket on the top of the Car DVR and with the screen facing you, slide the bracket from left to
right until the bracket locks in place.
3. With the suction mount tab in the up position attach the suction cup to the windscreen.
4. Press the mount base firmly against the windscreen and switch the suction mount tab to the down position.
2.2.1 Connecting the Rear Facing Camera
1. Clean the inside of your rear window ensuring there is no dust on the window.
2. Remove the protective film from the Rear Facing Camera's 3M sticker and place the camera in the desired position on the
inside of your rear window, ensuring that the rear camera's mount is above the rear camera's camera lens.
3. Hold the mount firmly against the glass for 30 seconds.
4. Connect the camera to the 6M Extension cable.
5. Run the cable tidily along or underneath your vehicles trim up to the Car DVR.
6. Making sure that the Car DVR is powered off, connect the mini USB plug to the Car DVR's Mini USB port.
2.2.2 Adjust the angle of the Car DVR
1. Loosen the knob on the right hand side of the mounting bracket, and adjust the vertical and horizontal angle of the camera.
2. Tighten the knob to lock the position of the camera.
Note:
1. Do not remove or insert the memory card while the Car DVR is turned on as this may
damage the memory card or corrupt the memory cards stored data.
2. Please use a Class 6 or higher rated micro SD card with a maximum capacity of 32GB.
3. Please format the Micro SD card before the initial use.
4. When removing the memory card, be careful as the card may eject quickly.
7