G Sensor; Volume; White Balance - NanoCam Plus NCP-DVRHD2 User Manual

2.7.5 G Sensor

The G Sensor defines the required force needed to trigger emergency recording. Once Emergency recording is triggered
the current recording will be saved and protected from being saved over by the normal loop recording. To set the required
sensitivity please follow the instructions below.
1. Press the
2. Hold the
3. Use the
4. Use the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2.7.6 Volume

The Volume setting controls the cameras volume output. To adjust the cameras volume, please follow the instructions
below.
1. Press the
2. Hold the
3. Use the
4. Use the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

2.7.7 White Balance

The White Balance setting is used to optimise your Car DVR to produce the best footage for the surroundings. To adjust
the White Balance, please follow the instructions below.
1. Press the
2. Hold the
3. Use the
select.
4. Use the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
12
OK
Button to stop the Car DVR from recording.
Button for 2 seconds to enter the Settings Menu.
M
Buttons to navigate the Settings Menu and highlight the G Sensor setting and press
and
and Buttons to turn highlight your required sensitivity, then press
OK
Button to stop the Car DVR from recording.
Button for 2 seconds to enter the Settings Menu.
M
and Buttons to navigate the Settings Menu and highlight the Volume setting and press
and Buttons to turn highlight your required Volume level, then press
OK
Button to stop the Car DVR from recording.
Button for 2 seconds to enter the Settings Menu.
M
and Buttons to navigate the Settings Menu and highlight the White Balance setting and press
and Buttons to turn highlight your required setting, then press
OK
OK
to confirm your selection.
OK
OK
to confirm your selection.
OK
to confirm your selection.
to select.
to select.
OK
to