Key Positions; Starting; To Remove The Ignition Key - Hyundai Santa Fe 2002 Owner's Manual

C040A01Y-AAT

KEY POSITIONS

KEY POSITIONS KEY POSITIONS KEY POSITIONS KEY POSITIONS
ON
ACC
LOCK
CAUTION CAUTION CAUTION CAUTION CAUTION: : : : :
The engine should not be turned off or the The engine should not be turned off or the
The engine should not be turned off or the The engine should not be turned off or the The engine should not be turned off or the
key removed from the ignition key cylinder key removed from the ignition key cylinder key removed from the ignition key cylinder
key removed from the ignition key cylinder key removed from the ignition key cylinder
while the car is in motion. while the car is in motion. while the car is in motion. while the car is in motion. while the car is in motion.
o o o o o "ON" "ON" "ON" "ON"
"ON"
When the key is in the "ON" position, the
ignition is on and all accessories may be turned
on. If the engine is not running, the key should
not be left in the "ON" position. This will dis-
charge the battery and may also damage the
ignition system.
o o o o o "ACC" "ACC" "ACC" "ACC" "ACC"
With the key in the "ACC" position, radio and
other accessories may be operated. If you open
the driver's door with the key in the "ACC" or
"LOCK" position, the chime will sound to remind
you that the key should be removed.
DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
o o o o o "LOCK" "LOCK" "LOCK" "LOCK" "LOCK"
The key can be removed or inserted in this
position. Steering is locked by removing the
key. When unlocking the steering, insert the
key, and then turn the steering wheel and key
simultaneously.
START
C070C01A-AAT

To remove the ignition key

To remove the ignition key To remove the ignition key To remove the ignition key To remove the ignition key
YR20010A
1. Turn the ignition key to the "ACC" position.
2. Simultaneously push and turn the ignition key
counterclockwise from the "ACC" position to
the "LOCK" position.
3. The key can be removed in the "LOCK"
position.
C050A01A-AAT

STARTING

STARTING
STARTING STARTING STARTING
WARNING: WARNING: WARNING:
WARNING: WARNING:
Never run the engine in a closed or poorly Never run the engine in a closed or poorly Never run the engine in a closed or poorly Never run the engine in a closed or poorly Never run the engine in a closed or poorly
ventilated area any longer than is needed to ventilated area any longer than is needed to ventilated area any longer than is needed to ventilated area any longer than is needed to ventilated area any longer than is needed to
move your car in or out of the area. The move your car in or out of the area. The move your car in or out of the area. The move your car in or out of the area. The move your car in or out of the area. The
carbon monoxide gas emitted is odorless carbon monoxide gas emitted is odorless
carbon monoxide gas emitted is odorless carbon monoxide gas emitted is odorless carbon monoxide gas emitted is odorless
and can cause serious injury or death. and can cause serious injury or death. and can cause serious injury or death.
and can cause serious injury or death. and can cause serious injury or death.
C050B01A-AAT
YR20070A
Normal Conditions: Normal Conditions: Normal Conditions:
Normal Conditions: Normal Conditions:
The Starting Procedure:
1. Insert key, and fasten the seat belt.
2. Depress the clutch pedal fully and place the
gearshift lever (manual transaxle) in neutral
or the selector lever (automatic transaxle) in
"P" (park) position.
3. After turning the ignition key to the "ON"
position, make certain all warning lights and
gauges are functioning properly before start-
ing the engine.
YR20020A
2- 3