Rear Seat Warning; Seat Belt Precautions - Hyundai Santa Fe 2002 Owner's Manual

5. Insert the headrests between the seatback
and the seat cushion.
6. To return the seatback to its normal posi-
tion, push the seatback folding lever and
reverse the above procedure.
o When you return the seatback to its upright
position, always be sure it is locked into
position by pulling and pushing on the top
of the seatback.
WARNING:
o The purpose of the fold-up rear seat
cushion and the fold-down rear seat
back is to allow you to carry more ob-
jects than could otherwise be accom-
modated. Do not allow passengers to
sit on the cargo area while the car is
moving. This is not a proper seating
position and no seat belts are available
for use when the seat back is folded
down.
This could result in serious injury or
death in case of an accident or a sud-
den stop. Objects should not extend
higher than the top of the front
seatbacks.
This could allow cargo to slide forward
and cause injury or damage during sud-
den stops.
o Make sure that the headrests are prop-
erly fixed in place to minimize the risk
of severe injury in case of an accident.
1- 12
FEATURES OF YOUR HYUNDAI
o When you return the rear seatback to its
upright position after being folded down,
be careful not to damage the seatbelt
webbing or buckle. In addition, do not
allow the seatbelt webbing or buckle to
get caught or pinched in the rear seat.
B080P01B-GAT

REAR SEAT WARNING

For the safety of all passengers, luggage or
other cargo should not be piled higher than
the top of the seatback.
B150A02A-AAT

SEAT BELT PRECAUTIONS

WARNING:
All occupants of the vehicle must wear
their seat belts at all times. Note that this
vehicle is equipped with a Supplemental
Restraint (Airbag) System as discussed
beginning on page 1-22. The seat belts
must be used in conjunction with the sup-
plemental airbag system. State laws re-
quire that some or all occupants of the
vehicle use seat belts. The possibility of
increased injury or severity of injury in an
accident will be increased if this elemen-
tary safety precaution is not observed.
B080P01O